7
How to Use
1: herbal tea: 100°C, app. 6 minutes brewing time
2: black tea: 100°C, app. 6 minutes brewing time
3: oolong tea: 90°C, app. 5 minutes brewing time
4: white tea: 80°C, app.4 minutes brewing time
5: green tea: 70°C, app. 3 minutes brewing time
The dot LED will light up below or above the selected brewing mode. Press
On/off (#4) button to start brewing. The red backlight of On/off (#4) button
will turn on.
2.2. Setting tea brewing temperature: In standby mode: When you press
Program (#1) button twice, the product enters the temperature setting mode,
the LED displays 80°C by default. Then, you can set the tea brewing
temperature from 40 ~ 100°C with the "-" /"+" (#2/#3) button within 5s.
2.3. Setting tea brewing time: In standby status: When you press the Program
(#1) button three times, the product enters the time setting program, the
LED displays 1 min by default. Then, you can set the tea brewing time from
1 ~ 15 min with the "-" /"+" (#2/#3) button within 5s.
2.4. In standby mode: When you press the Program (#1) button four times, the
product returns to the setting program in 2.1. If there is no operation within
5 s after you press the Program (#1) button, the LED returns to display the
current water temperature; when you press the Program (#1) button again,
the product directly returns to the setting program you selected last time.)
2.5.The kettle will enter into 'Keep Warm' mode after it reaches the set
temperature during water boiling.The blue backlight of the Program (#1)
button turns on and the red backlight of On/off button (#4) turns off. Specific
tea brewing mode: After water boiling, the kettle will automatically goes into
Brewing mode and displays the default brewing time of the selected
program. In this mode, the brewing time can be changed by pressing "+"/"-"
(#2/#3) button.
User defined tea mode: After water boiling, the kettle will display the set
temperature. At this time, you can repeatedly press the Program (#1) button
to switch between temperature display and time display. In the temperature
display state, "-" /"+" (#2/#3) buttons are invalid; in the time display state,
you can press "-" /"+" (#2/#3) button to readjust the brewing time.
