background image

6

31.Carefully

, pull it up and out of the bottom of the jug.

32.Wash the seal and blade unit in warm soapy water, rinse, and air 

     dry.

33.Take great care with the blades – don’t handle them directly, use 

     a nylon washing-up brush.

34.Replace the seal round the blade unit.

35.Turn the blade unit upside down, and replace it in the bottom of 

     the jug base.

36.Turn the blade unit anti-clockwise to tighten it.

Using the Processor

With the Support

37.Unplug the appliance.

38.Fit the spindle to the top of the motor unit.

39.Lower the jug on to the motor unit, then turn the jug clockwise, to

     lock it in place.

40.Choose the attachment you need.

41.Use the chopper for pulverizing ingredients.

42.Use the mixer to mix ingredients together

.

43.Use the creamer to thicken cream, to beat eggs, and to cream

     eggs and sugar together.

44.Fit the attachment over the support, and slide it to the bottom.

45.Lower the support into the centre of the jug, over the spindle.

46.Put the ingredients into the jug - don’t fill it past the max mark.

47.Hold the lid with the tube slightly behind the jug handle, set it on

     the jug, then turn it clockwise, to lock the tab into the top of the

     handle.

48.To add ingredients while the motor is running:

     a)lift the pushed out of the tube

     b)add the ingredients via the tube

     c)replace the pusher

49.To remove the lid, turn it anti-clockwise to unlock it, then lift it off.

Summary of Contents for 350105












Reviews: