Midea 22033010000701, Service Manual

Page: 35 / 52

ServiceManual_2018-V1.0
35
9. Function and operation
9.1 Operation panel
Icons Button
❶
Standby button
❷
Lighting button
❸
Display area
❹
Temperature increase button
❺
Temperature decrease button
❻
℉
/
℃
button
9.2 Display control
If power on for 1st time,the display area will shine fully last for 3 seconds with the start-up
tone,then enter in normal running state,the default set temperature is 12
℃ ，
14
℃
.
Normal operation display:
1
）
When failure occurs, will display the fault code (circular display);
2
）
The set temperature in the case of no failure.
9.3Temperature control
1)click the key of temperature up once, the setting temperature rise 1
℃
(
℉
), click the key of temperature down
once, the setting temperature drop 1
℃
(
℉
), the temperature setting take effect automatically after 30s
2) in Centigrade showing, the adjustable temperature range is 1 to 10; in Fahrenheit showing, the adjustable
temperature range is from 41 to 64, short press the key of Centigrade – Fahrenheit conversion to realize the
conversion between Centigrade and Fahrenheit
9.4 Control of standby function
Press standby button for 5 seconds to enter/exit standby mode;
When the standby mode is in effect, the compressor, refrigerator room fan, condenser fan, and lighting do not
work;
Note: The standby mode cannot be set when the sensor is faulty, and the door is not alarmed when in standby
mode.