Midea 22031020000125, Service Manual

Page: 25 / 45

Service Manual_2017-V1
25
Starter and protector of the compressor
1
）
Remove the screws
-Two screws outside
-One screw inside
2
）
Remove the clipping strip
Slowly pull it out
3
）
Remove the protective cover
-Pry the protective cover slowly from the upper part,
-Pull it out and remove it.
4
）
Remove the starter and protector Unplug the starter
and protector (you can use a screwdriver to pry it slowly)
5
）
The reverse process can complete installation. /
Condenser fan motor
Condenser fan motor None
Standby condenser
Standby condenser None
Piping system in the compressor case