Service Manual
, 2016-12
12
/
44
4
.
Remove right bottom hinge and reserve the
screws. Remove screw covers at left corner and
put them into the screw holes at right corner.
Install left hinge by using those reserved
screws.
5. Remove right pin assemblies from the
bottom of the freezer and refrigerator doors.
On the opposite side, attach the replacement
pin assemblies (located in the plastic bag with
the Use and Care Manual) with a screwdriver.
Note: You must re-use the screws from the pin
assemblies that are removed in this step when
attaching the new assemblies.
6. Place the refrigerator door on the bottom
hinge. Ensure the door is aligned horizontally
and vertically. Attach middle hinge to
refrigerator door and attach bolt washer to the
back of the hinge, then fix them to middle
beam and get them fastened with a screwdriver.
7. Place the freezer door on the middle
hinge. Ensure that the door is aligned
horizontally and vertically, and that the
gasket seals on all sides before attaching
the top hinge. Attach the top hinge and replace
the hinge cover.
Summary of Contents for 22031020000124
