Midea 22031010001341, Service Manual

Page: 21 / 42

Service Manual , 2016-12
21 / 42
1)
Remove the screws of hinge
2)
Unplug the wiring connector, and loosen the
plastic clip of lamp switch to dismantle lamp
switch
8.4 Air duct and fan motor
Air duct components in freezing chamber
All accessories in the freezing chamber should be
dismantled before removing the air duct components.
1
）
Remove 2 screws on the cover plate of the freezing
air duct using a cross screwdriver;
ace the Air duct in reverse steps.
1)
use cross screwdriver to remove the 2 pcs screws of
air duct cover
2) hold the upper position of air duct cover, and pull it
our slightly, it should be very careful for avoiding
the wiring harness/connector be damaged if
overexert
3) unplug all wiring connectors ,and dismantle the air
duct cover from the rear side of refrigerator inner
hold the upper cover from the bottom, pull out the
upper cover
Fan motor