Middleby Marshall PS360E Series, Owner'S Operating & Installation Manual

Page: 36 / 60

SECTION 3
OPERATION
36
Display Features
II. NORMAL OPERATION
Daily Start-up Procedure
To start the oven, turn the main ON-OFF switch to the
ON position. The oven will start and the operating
display will appear on the screen. The blowers will
begin and the blower proving switches will engage,
permitting the heat circuit relay to engage. Contactors
will engage and the heat relays will begin to cycle the
heating elements.
Adjusting the Temperature
To adjust the set temperature, press and hold the
button until the set temperature display flashes.
Press the or arrow until the desired set
temperature is displayed. Press the button to
set and save the new temperature value. If
button is not pressed, the new temperature will be
present only until the oven is turned OFF. The