En 11
English
Adjusting the mist setting:
Each time the Mist Setting button is pressed, the settings cycle as shown below.
H (High)
→
L (Low)
→
SL (Min)
Mist setting
Indicator color
H (High)
Blue
L (Low)
Yellow
SL (Min.)
Flashes yellow
Using the timer function:
Each time the Timer Setting button is pressed, the settings cycle as shown below.
CONT. (continuous operation)
→
2H (off after 2 hrs.)
→
4H (off after 4 hrs.)
Timer setting
Indicator color
CONT. (continuous operation)
Off
2H (off after 2 hrs.)
Yellow
4H (off after 4 hrs.)
Flashes yellow
The Power/Water indicator (P/E)
When the indicator is lit, this indicates that the water level in the tank is low.
When the water level in the water tank and water tub get low, the alarm makes a
sound with five beeps, and the Power/Water indicator (P/E) lights up red.
After draining any water remaining in the water passage, refill the water tank with new water.
1
When water reaches the humidifier from the water tank, the Power/Water indicator (P/E)
2
turns off.
Press the Power button to start operation.
3
CAUTION
If water needs to be refilled, the alarm makes a sound with five beeps, and the Power/
Water indicator (P/E) lights up red. Refill the water tank with water.
Using the Aroma Base
Pull out the felt case from the aroma base holding the humidifier.
1.
Felt case
Soak the felt in the case with an aroma oil.
2.
Check that felt is inserted in the felt case. Soak the felt with two or three drops of
aroma oil or essential oil (available commercially) while being careful that it does not
spill outside the case. Next, insert the felt case all the way inside the humidifier.
02̲MDL-KH1003EU̲3L̲EnFrGe.indb En
11
02̲MDL-KH1003EU̲3L̲EnFrGe.indb En
11
2012/06/20 18:43:26
2012/06/20 18:43:26
