Middle Atlantic Forward BGR, Instruction Sheet

Page: 4 / 6

Page 4
FIGURE E
FIGURE F
3. Use a hex head bolt (B) through a larger hole in
the top location on one of your rackrails (A) and
into the rackrail nut (C) as shown. ( FIGURE F )
4. Repeat the previous steps to match the
hardware amounts (hex head bolts and rackrail
nuts) to the amount of rackrail brackets in your
enclosure.
TIP : Work from the top rackrail bracket down.
5. Now, repeat the previous steps using the
other piece of rackrail and hardware on the other
side of your enclosure’s interior.
6. Position your rackrails evenly in your desired
location along the rackrail brackets.
7. Use a 7/16” wrench to tighten all bolts.
NOTE
:
• Exact installation position along the rackrail
brackets may vary based on your specific power
and cabling setup.
• Install your rackrails in line with any existing
rackrails already in your enclosure.
1. Line up one of your rackrails (A) against the
rackrail bracket fixed holes inside of your
enclosure to determine which of the larger holes
on the rackrail will be used for your hardware
(hex head bolts and rackrail nuts).
2. Drop a rackrail nut (C) into the slot along the top rackrail bracket in your desired location for your
rackrail (A) on one side of your enclosure’s interior as shown. ( FIGURE E )
INSTALLING FORWARD BGR RACKRAILS INTO RACKRAIL BRACKET FIXED HOLES
B
C
NOTE : View
from inside of
enclosure.
NOTE : View
from outside of
enclosure.
FIGURE D
Isolated rackrail bracket from a
BGR with fixed holes left black for
clarity. ( FIGURE D )
A
C