CAUTION: Do not connect the UPS expansion battery pack into itself, as this will damage the
battery pack.
CAUTION: Remember the Battery Pack is charged. Before connecting to the UPS, ensure the
circuit breaker/switch on the UPS expansion battery pack is in the OFF position.
READ AND SAVE THESE WARNINGS
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: Remember the Battery Pack is charged. Do not disconnect the UPS expansion battery
pack while the UPS is turned on.
WARNING: The UPS expansion battery pack must be connected to a grounded AC power outlet with
fuse or circuit breaker protection. Do not plug the UPS expansion battery pack into an
outlet that is not grounded.
WARNING: Remember the Battery Pack is charged. To reduce the risk of electric shock, do not
remove the cover. There are no serviceable parts inside the product.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the product.
The lightning flash with the arrowhead symbol, within an equilateral triangle, is intended to alert the user
to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.
UNPACKING
CAUTION: DO NOT LIFT THE BATTERY PACK OUT OF THE SHIPPING BOX WHILE HOLDING THE
FRONT FACE OF THE BATTERY PACK, AS THIS MAY DAMAGE THE UNIT. LIFT THE
BATTERY PACK OUT OF THE SHIPPING CARTON BY HOLDING IT BY BOTH SIDES.
LIFT OUT OF BOX
WHILE HOLDING
BOTH SIDES OF
BATTERY PACK
LIFT OUT OF BOX
WHILE HOLDING
BOTH SIDES OF
BATTERY PACK
After the product is removed from its packaging, inspect the expansion battery pack before
installing. The shipping carton should contain the following items:
(1) Expansion Battery Pack with a permanently attached output 48 VDC cable, (2) rack mounting ears,
(2) front handles, (14) 10-32 mounting ear screws, (6) 8-32 front handle screws, (1) instruction sheet
CAUTION: The expansion battery pack circuit breaker/switch must be in the OFF position when
either making a connection to or disconnecting from either the battery pack 48 VDC
input/output connectors or the UPS 48 VDC external battery pack connector.
Page 2
