Page 5
ASSEMBLY (TOP AND BOTTOM FACING OUTWARD)
TIP: Installing the Base facing outward will increase rack stability.
1) Install Top Brackets (F) and Bases (E) with supplied hardware (H) as shown.
Loosely tighten hardware.
SEE FIGURE F
SEE FIGURE G
2) Stand rack upright, square the assembly by
installing the squaring panels (N) with supplied
6MM cage nuts and rack screws as shown.
Fully tighten all hardware. (FIGURE H)
F
E
FIGURE F
FIGURE H
Tools Required In This Step: 9/16" Wrench
H
H
FIGURE G
N
N
