Page 4
NOTE
:
• Arrow on side of fan (A) indicates the air flow
direction. Install with arrow pointing outside of
the enclosure. (
FIGURE A
)
• Install fans with plugs facing each other as
shown. This will ensure that the power cord
(E) (and bonding wire) is able to reach both
fans. (
FIGURE B
)
FIGURE A
E
FIGURE B
1. Use a rubber mallet to clear desired
fan knockouts from the inside out of your
enclosure.
SUPPLIED COMPONENTS AND HARDWARE (CONTINUED)
INSTALLATION
OPTIONAL PROTECTIVE EARTH TERMINAL KIT (PET-K-DWRFK)
REQUIRED TOOLS
• Rubber Mallet
• No. 2 Phillips Driver
• 5/16” Wrench or Socket
• Scissors
10-32 Locking
Flange Nut
H
(2x) M4 x 8MM Phil.
Head Combo Screw
K
Split Bonding Wire
J
WARNING
: Use tools with caution and follow all necessary safety
protocols.
AVERTISSEMENT
: Utiliser des outils avec prudence et suivre
tous les protocoles de sécurité nécessaires.
