Midas VeniceU16, Operator'S Manual

Page: 26 / 122

16
Chapter 2: Getting Started
VeniceU
Operator Manual
Other connections
The section gives details of the other Venice U interconnections.
Setting up
There is no initial setting up required for the Venice U console. However, if you want to
use USB, you will need to set up your PC first (see Chapter 3 "Using The VeniceU With
USB" on page 19).
Description Example of plug or
device Pinouts Example of socket
4-pin, male XLR
chassis connector(s)
on the rear panel for
connecting 12V/5W
lamp(s) 1 = N/A
2 = N/A
3 = ground
4 = 12V
Female XLR chassis
connector (talk mic) 1 = ground
2 = hot
3 = cold
USB socket for type B
connector. (The
supplied USB lead is
terminated in a type B
connector and a type
A connector.)
Important:
If you have any
audio problems
these may be due
to ground loops
(see Appendix
E "Best Grounding
Practice" on
page 97).
N/A
Headphones socket in
the
local monitor
section of the control
surface for connecting
a 1/4” TRS Jack plug.
There is also one
under the armrest on
the desktop versions.
1 (tip) = left
2 (ring) = right
3 (sleeve) =
ground
4
1
3
2
2 1
3
1 2 3