Midas Pro 6 DL351, Operator'S Manual

Page: 26 / 70

10
Chapter 4: Getting Started
DL351 Modular I/O
Operator Manual
Powering the unit
Caution:
Do not switch the mains on/off switches on or off simultaneously.
They must be switched on or off one at a time.
This section shows you how to switch the unit on/off, and also how to completely isolate
it electrically.
>> To switch the unit on
Switch on the mains on/off switches (rear of the unit) one at a time. See the Caution
at the beginning of this section.
>> To switch the unit off
Switch off the mains on/off switches one at a time. See the Caution at the
beginning of this section.
To electrically isolate the unit completely, disconnect the two mains power connectors
from the rear of the unit (just below the mains on/off switches).
Setting up
Initial setting up of the DL351 Modular I/O involves allocating an ID for it within the
PRO6 network system environment; see “To set up the ID of the unit” on page 17.
Configuration
Configure the clock source and digital board(s), if fitted, of the DL351 Modular I/O unit
to suit your operating requirements; see “Main menu options” on page 17 for details.