manualshive.com logo in svg

Midas DL371, Operator'S Manual

Share
Download
Midas DL371 Operator'S Manual Download Page 49

Integration of third party hardware/software

47

DL371 Audio System Engine
Operator Manual

PC or MAC computers can use the Ethernet tunnel in the MidasNET system, and can 
communicate with other computers on the network.

The PRO6 Control Centre features an external video for both screens, and the master 
bay GUI screen (on the right) also has a three-way KVM switch.  Control centre views 
can be routed to external monitors, and external video sources can be displayed on the 
control centre.

The KVM switch facilitates the control of three external computers via the screen, 
trackball and keyboard of the control centre.  This is hugely important and means that 
third party systems can be controlled from within the PRO6 without having to move 
your head to look at screens placed off to one side.  It also means that there is no need 
to find somewhere to put multiple keyboards and mice.  Examples are:
• Netmax (AES/EBU audio link initially and CobraNet™ when the 48kHz I/O module is 

available on PRO6).

• IRIS (for example, for RL amps).
• Wireless mic controllers.
• Your  email.
• DVD  movies.

Summary of Contents for DL371



























































Reviews:

No comments

Brands by name

Popular brands

Load more brands