Mid-tech ARC 6000, User Manual

Page: 47 / 68

6-5
98-05012
R3
ARC-6000
MID-TECH recommends this procedure as a
temporary, emergency procedure only. The prob-
lem should be resolved as soon as possible to allow
full automatic control of the sprayer to be reestab-
lished.
D. Drive toward the swath to be covered. When
the vehicle reaches the starting point of the
desired swath, turn on the appropriate boom
switches and the sprayer will start to spray.
At this point, the operator is enjoying some
monitoring functions of the ARC, but has
no automatic control of the flow control
valve.
E. Monitor SPEED. Adjust the ground speed to
reach the target speed desired.
F. The console cannot automatically adjust for
changes in boom widths. If booms are shut
off, pressure must be reset using the INC/
DEC switch. Areas accumulate normally.
Speed reads correctly.
DISPLAY SELECTOR
Speed
Field Area Impl. Width
Distance
Test
Speed
Prime
Total Applied
Application Rate
OFF SET- UP DEC.
ON
OPERATE INC.
Scan
Product Vol.
Total Area
BOOMS
1 2 3 4 5 6 7 8 9
% Rate
D-3
Mid-Tech