MicW Audio
A Division of BSWA Technology Ltd
Unit 1003 North Ring Center,18 Yumin Road,Beijing 10029
China
www.mic-w.com
¾
Answer 5
It related to the diaphragm resonance frequency of the microphone capsule.
¾
Question 6
Does it work on other phones (Android)
¾
Answer 6
We did not test i436 with other phones
¾
Question 7
Is there a chance to integrate some kind of pad-switch or make some special low sensitive model.
the Car-HiFi and Live-Engineer guys are asking for 150dB!!
¾
Answer 7
:
It is possible to design a special cable with -20dB or -40 dB pad to low the sensitive. However the
current design of i436 can only achieve 130 dB even with special pad cable. For 150dB, the
engineers may have to use N401 microphone which can handle 160dB.
¾
Question 8
What is the bit depth and the sampling rate of the iPhone
Answer 8
: The iPhone 3 and 4 use 24 bits and 48kHz sampling.
¾
Question 9:
Is there a chance to integrate an inverted frequency response to the Iphone Low-Cut in an app?
¾
Answer 9
Yes. It can be done in the software. For the recording application, the software
allows the users to control the gains at each octave bands. For the measurement application, the
users have to look into the software specifications. The i436 only gives the flat frequency response.
¾
Question 10
What kind of spilt cable is supplied in the kit of the i436, I hope it is with Cinch/RCA-Connectors for
Line Out.
¾
Answer 10
The i436 Kit includes i436 microphone; split
cable, extension cable (3meters), clip,
windscreen. The split cable has two 3.5 mm
jacks, one for microphone and the other for earphone.
