104
11.4 Settings
Tap
in the homepage to enter the system setting interface. The setting interface includes brightness,
SOUNDS, language, shutdown time, USB, LAN, WLAN, WLAN AP, upgrade and INFORMATION.
The system setting interface is shown in Figure 11-3.
Figure 11-3 System setting interface
Brightness
Brightness adjustment method: adjust the brightness of the screen display, drag the "Brightness" display bar, and
the screen brightness will change accordingly.
Sounds
Volume adjustment method: adjust the volume of the prompt tone, drag the "volume" display bar, and the soft
key and power on music sound will change accordingly.
Language
The oscilloscope supports multi language display, including simplified Chinese and English.
Shutdown time
Tap the shutdown time display bar to set the shutdown time. If there is no operation within the set shutdown time,
the oscilloscope will automatically shut down. If the oscilloscope is operated within the shutdown time, the
system will start to calculate the shutdown time again, and will not shut down automatically until the requirements
are met.
Adjustment range of standby time: invalid, 1-60min.
USB
When the USB cable is used to connect the oscilloscope and PC for the first time, the PC will pop up the prompt
of installing the driver. Only after the driver is installed correctly can the oscilloscope exchange information with
the computer. After installing the driver, modify the USB connection mode to achieve different effects:
1) USB connection: after the USB connection is selected, the host computer software can be used to update the