Microwave Radio Communications SCM4000, Technical Reference Manual, Page: 177 / 274

Routine Operation 3-155 SCM4000 Operator’s Guide/Tech Ref Manual
9. Press the SEL key or Right arrow key and observe the
Save Settings option changes to #X:Preset #X , as
shown in Figure 3-445 , and the > cursor changes to a
! cursor.
Figure 3-445: Recall Preset Option
10. Press the Up, Down, Left, or Right arrow keys to select
Preset
1 thru 9 , as required, and press the SEL key.
11. Press the ESC key repeatedly until the Main Screen is
displayed.
3.11.3 Recall Preset Settings
To recall individual Presets, perform the following steps.
1. Verify the SCM4000 is powered up.
2. Verify the Main Screen is displayed. See Figure 3-
446 . If the Main Screen is not displayed, press the
ESC key repeatedly until the Main Screen is
displayed.
Figure 3-446: Main Screen Menu - Typical
3. Press the Down arrow key, as required, to move the
>> cursor to the System Menu option.
Preset Menu
! #X: Preset #X
Recall Preset
#X: Preset #X
SCM4000
>> Modulator
System Menu
4. Press the SEL key or Right arrow key and observe the
System Menu is displayed. See Figure 3-447 .
Figure 3-447: System Menu - Typical
5. Press the Up or Down arrow keys, as required, to
move the
>> cursor to the Preset Menu option.
6. Press the SEL key or Right arrow key to select the
Preset Menu option.
Note “ X ” indicated in the Preset Menu in the following
steps represents Presets 1 thru 9 . “ Preset #X ”
represents the Preset name.
7. Observe the Preset Menu is displayed. See Figure 3-
448 .
Figure 3-448: Preset Menu
8. Press the Up or Down arrow keys, as required, to
move the cursor to the
Recall Preset option. Observe
the cursor changes to a > cursor.
System Menu
>> Preset Menu
Active Errors
Error Log
Preset Menu
* #X: Preset #X
Save Settings
Recall Preset