Microwave Radio Communications SCM4000, Technical Reference Manual

Page: 153 / 274

Routine Operation 3-131 SCM4000 Operator’s Guide/Tech Ref Manual
3.9.9 Monitor/Change Audio B Settings
To monitor or change Audio B option settings, perform the
following steps for each Preset, as required:
1. Verify the SCM4000 is powered up.
2. Verify the Main Screen is displayed. See Figure 3-
371 . If the Main Screen is not displayed, press the
ESC key repeatedly until the Main Screen is
displayed.
Figure 3-371: Main Screen Menu
3. Press the Down arrow key, as required, to move the
>> cursor to the System Menu option.
4. Press the SEL key or Right arrow key and observe the
System Menu is displayed. See Figure 3-372 .
Figure 3-372: System Menu - Typical
5. Press the Up or Down arrow keys, as required, to
move the
>> cursor to the Preset Menu option.
6. Press the SEL key or Right arrow key to select the
Preset Menu option.
SCM4000
>> MPEG Encoder
Modulator
System Menu
System Menu
>> Preset Menu
Active Errors
Error Log
Note “ X ” indicated in the Preset Menu in the following
steps represents Presets 1 thru 9 . “ Preset #X ”
represents the Preset name.
7. Observe the Preset Menu is displayed. See Figure 3-
373 .
Figure 3-373: Preset Menu
8. Press the Up or Down arrow keys, as required, to
move the cursor to the
Recall Preset option. Observe
the cursor changes to a > cursor.
9. Press the SEL key or Right arrow key and observe the
Recall Preset option changes to #X:Preset #X , as
shown in Figure 3-374 , and the > cursor changes to a
! cursor.
Figure 3-374: Recall Preset Option
10. Press the Up, Down, Left, or Right arrow keys to select
Preset
1 thru 9 , as required, and press the SEL key.
11. Press the ESC key repeatedly until the Main Screen is
displayed.
Preset Menu
* #X: Preset #X
Save Settings
Recall Preset
Preset Menu
! #X: Preset #X
Save Settings