User Reference and Installation Guide
3-6
© 2006 Microwave Data Systems Inc. All Rights Reserved.
MDS FOUR.9 Series
05-4561A01, Rev. A
•
Confirm
•
Line of sight for each link
•
ODU mounting locations
•
Site equipment locations
•
Cable routes
•
Any other potential RF sources
•
Prepare site drawings and record site information
3.6.1
Preparing for a Site Evaluation
The following tools are required to perform a site evaluation:
•
RF and network design diagrams (as required)
•
Binoculars
•
Global positioning system (GPS) or range finder
•
Compass
•
Measuring tape and/or wheel
•
Digital camera
•
Area map
•
Aerial photograph (if available)
•
List of potential installation sites (“targeted buildings”)
The following tasks must be completed prior to performing a site evaluation:
•
Prepare the initial network design by performing the following:
•
Identify potential buildings by identifying targeted customers (applicable if you’re a service
provider)
•
Identify potential links by selecting buildings based on the high probability of line of sight
•
Arrange for access with the facility personnel into the buildings, equipment rooms, and
architectural plans to become familiar with the location of all ducts, risers, etc.
Summary of Contents for FOUR.9 Series
Page 2: ......