Microwave Data Systems EL805, Installation & Operation Manual

Page: 73 / 78

MDS 05-2708A01, Rev. B MDS TransNET 900 I&O Guide I-3
network-wide diagnostics,
procedures 43
Setup mode (SETUP command) 35
skipped zone (SKIP command) 36
Sleep Mode
Encryption. See CODE command
Equipment List 30
Extension radio. See
Store-and-Forward (SAF)
F
Feedline
selection 10, 11
Fuse Replacement 44
G
Gate (radio diagnostics type) 31, 44
H
Hoptime
setting 20
HOPTIME command (set/display
hoptime setting) 31
I
Illustrations
antenna, Yagi 11
data interface cable wiring for
tail-end links 17
model configuration code 2
point-to-point link 4
remote station arrangement 7
tail-end link 4
typical MAS network 3
INIT command (restore factory default
settings) 31
InSite software 43
Installation 13–18
antenna 14
connecting transceiver to data
equipment 14, 21
feedline selection 11
performance optimization 19
requirements 6
site selection 7
site survey 8
tail-end links 17
transmission path 7
Interference
about 9
checks 21
troubleshooting 42
K
Key
set to CTS keying (DEVICE
command) 30
transmitter, for antenna SWR
check 20
KEY command (key transmitter) 20,
36
L
LED status indicators
table 19, 40
M
Master Station
default settings 33
MODE command (display/set radio
mode as master, remote, or
extension) 32
MODE command (display/set radio’s
operating mode as master, remote, or
extension) 32
Model configuration code, illustrated 2
Mounting
instructions/dimensions 13–14
Multiple Address System (MAS)
network, illustrated 3
N
Network configuration commands 22
Network-wide diagnostics
procedures 43
Node (radio diagnostics type) 31, 44
O
Operation 19–21
OWM command (set/display optional
owner’s message) 32
OWN command (set/display optional
owner’s name) 32
P
PC
connecting to radio’s diagnostic
port 43
launching InSite application at 43
performing diagnostics using