7.3.3 Pipe assembly
The optional "Pipe mounting kit for myDatanet housing 86x126 (206.660)" equipment is required for the pipe
assembly.
Step 1 of the pipe assembly
Step 2 of the pipe assembly
1
myDatalogEASY IoTmini
3
Assembly loop (included in the scope of delivery of
206.660)
2
Delta PT M3.5x8 Torx 15 (included in the scope of
delivery of 206.660)
4
Cable binder (included in the scope of delivery of
206.660)
1. First attach the assembly loop (3) using the screws (2) included in the "Pipe mounting kit for myDatanet
housing 86x126 (206.660)" equipment set to the myDatalogEASY IoTmini (see "Step 1 of the pipe
assembly " on page 48).
2. Position the myDatalogEASY IoTmini with the attached assembly loop (3) on the pipe and use the
supplied cable binders (4) to secure the myDatalogEASY IoTmini (see "Step 2 of the pipe assembly"
on page 48).
48
Rev. 01