Microtronix Access Serial-TCP/IP Converter
3.4 IP Network Configuration
To create or modify the IP network parameters different than the default values defined in U-Boot ,
obtain the new IP address, network mask, and default gateway values. Follow this procedure only if
you don't want the default values to be used in the running system.
From the main menu
System Configuration
section, select
Network
to display the configuration form.
1) Click on the Select button in the Ethernet Interfaces table corresponding to “eth0”.
2) Enter the new IP address and network mask.
3) Enter the new Default Gateway IP address, if needed.
4) Click the
Apply
button for the changes to be saved and to take affect.
Connect the Network port to the new network, if not already. Since the IP connection may be lost due
to the change, the new address may need to be entered in the browser. The Network configuration
page displays the current status of the Ethernet interface.
For more information on additional network configuration, click the
Help
button on the page.
www.microtronix.com
10
