16
Turning Monitor On and Off
Turn the power switch on (left side of the top of the monitor as viewed from the front, or the Power
button on the IR Remote).
The monitor should come on within 10 seconds.
Note:
If there is no video input signal for a preset period, the monitor will automatically go into standby
mode. Allow up to 10 seconds for the video to reappear after the signal is reapplied.
Power Status LED
The LED on the top left of the monitor shows the monitor power and video status.
Power LED Status
Condition
Green
Power on
Blinking Orange
No signal
Orange
Power saving mode
Off
Power off
