9
Warnings
To turn off monitor power, press “Power” on the OSD (On-Screen Display) keypad on the right rear
side of the monitor or on the optional wired remote if it is connected.
When turning off the monitor by pressing the POWER button, the main power of the monitor is not
turned off completely.
To disconnect power completely, remove the power plug from the outlet.
If any of the following occur, remove the power plug from the outlet immediately:
the monitor is dropped; the housing is damaged; water is spilled onto or objects dropped inside the
monitor.
Failure to immediately remove the power plug
may result in fire or electrical shock. Contact
qualified service personnel for inspection.
If the power cord or plug is damaged or becomes hot, turn the monitor off, make sure the power
plug has cooled down and remove the power plug from the outlet.
If the monitor is still used in this condition, it may cause fire or electrical shock. Contact your dealer for
replacement.
! Si l’un des événements suivants se produit, débranchez immédiatement la fiche
d’alimentation de la prise:
le moniteur est tombé; le boîtier est endommagé; de l’eau est
renversée ou des objets tombent à l’intérieur du moniteur.
Si vou ne débranchez pas immédiatement la fiche d’alimentation, vous risquez de
provoquer un incendie ou un choc életrique. Contacter le personnel de service qualifé
pou inspection.
! Si le cordon d’alimentation ou la fiche est endommagé, ou deviant chaud, éteignez le
moniteur, assurez-vous que la fiche d’alimentation a refroidi et débranchez la fiche
d’alimentation de la prise.
Si le moniteur est toujours utilizé dans cet état, il peut provoquer un incendie ou un choq
électrique. Contactez votre revendeur pour le remplacement.
!
If any of the following occur, remove the power plug from the outlet immediately:
the monitor is dropped; the housing is damaged; water is spilled onto or objects dropped
inside the monitor.
Failure to immediately remove the power plug
may result in fire or electrical shock.
Contact qualified service personnel for inspection
.
!
If the power cord or plug is damaged or becomes hot, turn the monitor off, make sure
the power plug has cooled down and remove the power plug from the outlet.
If the monitor is still used in this condition, it may cause fire or electrical shock.
Contact your dealer for replacement.