MicroTouch DT-150P-A1, User Manual

Page: 25 / 37

24
(Please note: the monitor has to be turned ON with a valid signal pre-set)
a. Press the " Enter " key 5 time,
The “Lock/Unlock” menu will appear for 3
seconds.
b. Use the "Enter" key to select OSD or Power setting then set a
t “Lock” by
pushing the "UP" or "Down" button.
c. When the "UP" or "Down" button is released, the previous setting will be
saved and exit the
“Lock/Unlock” menu automatically.
7. To Unlock the OSD / Power menu buttons, please follow the instructions below.
(Please note: the monitor has to be turned ON with a valid signal pre-set)
a. Press the " Enter " key 5 time,
The “Lock/Unlock” menu will appear for 3
seconds.
b. Use the "Enter" key to select OSD or Power setting then set
at “Lock” by
pushing the "UP" or "Down" button.
c. When the "UP" or "Down" button is released, the previous setting will be
saved and exit the
“Lock/Unlock” menu automatically.
Please note:
1. When the OSD Lock function is selected, this indicates that all the buttons
except “power” button are now disabled.
2. When the Power Lock function is selected, this indicates that the power key is
disabled; user can not to turn off the monitor by "Power" key