24
3.1.5.3 Meter Mode - Insulation
This function allows performing of insulation test (one to other); press the high voltage switch to send
high voltage and perform test.
※
Beware high voltage: Press the high voltage switch and the Vdc shows ON, and the
H.V. signal on the panel turns on, which means that high voltage is being sent to the straight boxed output
terminal and the high voltage calibration terminal. During this time, there is the danger of electrification;
do not touch the high voltage sending terminal and the connected test DUT and fixture.
VOLT: Sets the DC test voltage.
Vdc: High voltage sending display.
Pin: Sets the test pin.
The LCD screen will display as follows:
Summary of Contents for 8751
Page 1: ...8751 8761 4 Wire Universal Cable Harness Tester User Manual Version 1 00 Issued Date May 2017...
Page 31: ...30 3 2 2 Setting the Testing Environment 1 The LCD screen will display as follows...
Page 74: ...73 2 Press S6 SORT to execute the file sort action 3 File order after sorting...
Page 76: ...75...
