Microtest 6630E, User Manual

Page: 50 / 56

- 43 -
Appendix
Common Commands
Command Function Description
*IDN? Identification query Returns the data identifying the instrument.
(e.g. the data output will be:
‘MICROTEST,6630E-10,1.000’ where the first
field is the manufacturer, then the model
number, then a zero and the software revision
number: here represented as Issue 1.0).
*TRG Trigger and query Triggers a direct measurement and returns the
results to the controller.
:TRIG Trigger Triggers a direct measurement, but does not
return the results to the controller.
:TRIG? Trigger and return Triggers a direct measurement and returns the
results to the controller. This is as same
as ’*TRG’ command.
:DISP:PAGE
<MEAS|SWEEP|CAL|SYSTE
M} Select measuring mode MEAS Meter mode
SWEEP Sweep mode
CAL Calibration mode
SYSTEM System mode
:DISP:PAGE? Returns the measurement mode of the
currently selected step.
:MEAS:PARA? Returns the parameter of the currently selected
step.
:MEAS:FREQ <frequency
NR3>
Set frequency of AC measurement Frequency range : 10.0 ~ 30000000.0 Hz
:MEAS:FREQ? Frequency query
:MEAS:VOLT:AC <voltage
NR3> Set voltage of AC measurement Voltage range : 0.01-2.0 V
:MEAS:VOLT:AC? AC voltage query
:MEAS:CURR:AC <current
NR3> Set current of AC measurement Current range
Output Resistance 100 Ohm : 0.0001-0.02 A
Output Resistance 25 Ohm : 0.0002-0.04 A
:MEAS:CURR:AC? AC current query
:MEAS:VOLT:DC <voltage
NR3> Set voltage of DC measurement Voltage range : 0.01-2.0 V