16 ScanMaker i450 Supplement
D. Scanning Film (1)
This scenario uses the
ScanWizard EZ - Advanced Mode
.
1. Raise the scanner lid, then follow the
procedures in the “Positioning Transparent
Film” section to load the film and to place the
film holder on the scanner glass surface. Gently
lower the scanner lid down onto the scanner
scan bed.
2. Follow the procedures (step 2 and 3) in
“Scanning Photos (2)” to activate the
ScanWizard EZ - Advanced Mode
.
3. Click the
Preferences
button (
) to open the Preferences window; then
Positive
Film
for transparencies and slides; choose
Negative Film
for negatives, depending
on the film type you are using.
4. If necessary, specify other settings related to your output image in the Preferences
window.
a) Select a desired scan quality from
Speed
,
Quality
, and
Best Quality
options in
the Scan Mode layer.
b) Specify the folder location, a file name, and the file format for the output
image in the Save layer.
c) Specify a preferred application to open your output image in the Save layer.
5. Click the
Preview
button ( ) to perform a preliminary view of the entire
image, which will appear in the Preview area at the right side of the window.
6. After a preview image is shown in Preview area, if necessary, you can resize the
scan frame (floating dotted line) around the image by dragging on the edge or
corner of the scan frame to determine the final size of the actual scan.
7. Click the
Select
button ( ) to activate a display of nine-image effects and
related option settings.
8. Specify the scanning requirements depending on your purpose about
manipulating the image.
- Select a desired viewing size for the on-screen display purpose.
- Select a desired output dimension and a resolution for printing purpose.
- Set up a custom resolution.
