2
English
Deutsch
Français
Italiano
Nederlands
Espa
ñ
ol
Accessory Port
5. Connect LightLid to
your scanner
Plug the LightLid connector into the 15-pin
Accessory port on the back of your scanner.
6. Peel off the protective
vinyl film
Peel off the protective vinyl film from the back of
the template.
The protective vinyl film covers the template during
shipping and prevents it from being scratched.
When peeling the vinyl film from the template, be
careful not to tear off or bend the template.
Template should fit snugly
within the scanner glass
surface and not overlap on
the vertical/horizontal rulers.
8. Press the template
against the glass
surface
Press the template all the way around against the
scanner glass bed. This ensures that the template
adheres securely to the glass.
7. Position the template
Place the template on the scanner glass surface. The
clear opening strip should point toward the front
of
the scanner.
Clear opening strip
