19
PROBLEM: There is no LCD display
If there is no display on the LCD, please perform the following steps:
1.
Make sure that the power indicator on the LCD Monitor is lit, all
connections are secure, and the system is running on the correct
timing. Refer to the Addendum for information on timing.
2.
Turn off the LCD Monitor and then turn it back on again. Press
the upper Function Control button (refer to Chapter 2) once and
then press either the upper or lower Adjustment Control button
several times. If there is still no display, press the other Adjust-
ment Control button several times.
3.
If step 2 does not work, connect your PC system to another ex-
ternal CRT. If your PC System functions properly with a CRT
Monitor but it does not function with the LCD Monitor, and the
LCD Monitor’s power LED is blinking, the output timing of the
PC’s VGA card may be out of the LCD’s synchronous range.
Please change to an alternate mode listed in Appendix B or re-
place the VGA card and repeat steps 1 and 2.
4.
If the PC does not function with the CRT monitor as well, check
the BIOS to see if there is a dual scan setting under the display
mode item. Set the BIOS display mode to
Dual Scan
or
CRT
and
try again. If there is still no display, then there may be a problem
with your system. Contact technical support.
5.
If the power LED is not lit, check to see if the AC power connector
is securely connected. In addition, verify that the AC adapter
LED is lit. If the AC adapter LED is not lit, please contact your
dealer for assistance.