5
Connecting the Monitor
Warning
: Do not operate the LCD monitor with unspecified
power supply. Usage of incorrect voltage will cause the unit to
malfunction and may cause fire or electric shock.
1. Turn off your computer and LCD monitor.
2. From the box, take out the
monitor and place on the table,
with the front side facing
down.
Note
: To prevent damaging or
scratching the LCD monitor, always
keep the surface of the table clean or
covered with a soft cloth when
handling the monitor.
3. From the rear view of the LCD
monitor, disengage and
remove the plastic back cover
from the stem.
4. Tilt the stem slightly to a
slanting upright position (max.
25° from the surface).
5. Thread the VGA connector of
the VGA cable through the hole
of the stem, then connect it to
the LCD monitor’s VGA port.
6. Thread the DC connector of the
adapter through the hole of the
stem, then plug it to your
monitor’s DC jack.
Make sure the cables are
securely connected.
Plastic rear cover
Stem
