14
Appendix
Troubleshooting Procedures
This LCD Monitor was pre-adjusted in the factory with standard VGA
timing. Due to output timing differences among various VGA cards, you
may initially experience an unstable or unclear display when a new display
mode or new VGA card is selected.
Note : This LCD Monitor Supports Multiple VGA Modes. Refer to the
timing table for a listing of factory-preset modes supported by this LCD
Monitor.
Problem: There is no LCD Display
If there is no display on the LCD, please perform the following steps:
1.
Make sure that the power indicator on the LCD Monitor is lit, all
connections are secure, and the system is running on the correct
timing. Refer to table 1 on page 6 for information on timing.
2.
Turn off the LCD monitor, then turn it back on. Press the upper
Function Control button once and then press either the upper or lower
Adjustment Control button several times. If there is still no display,
press the other Adjustment Control button several times.
3.
If step 2 does not work, connect your PC system to another external
CRT. If your PC System functions properly with a CRT Monitor but it
does not function with the LCD monitor, and the LCD monitor’s power
LED is blinking, the output timing of the PC’s VGA card may be out of
the LCD’s synchronous range. Please change to an alternate mode
listed in table 1 on page 6, or replace the VGA card and repeat steps 1
and 2.
