Microtech e-tab LTE, Quick User Manual

Page: 36 / 51

36
Recharge your e-tab LTE
Connect the USB cable to the power adapter.
Connect the USB connector to the tablet.
Connect the power adapter to a grounded power outlet.
Safety precautions for power supply and battery
Use the correct external power source. The power adapter
for this product can only be used with the type of power
source indicated on the electrical rating label. If you are
not sure of the type of power source required, contact the
authorized Microtech assistance service.
Battery pack care
The product contains a lithium polymer battery.
If the battery pack is handled incorrectly there is a risk
of fire and burns. Do not attempt to open or repair the
battery pack.
In case of prolonged stop of the device make sure to
leave the batteries with a residual charge of about 50%.
The device displays a low battery warning when the
battery is almost empty. Charge the device immediately
to prevent it from turning off automatically.