![Microtech Axio ST Operation Manual Download Page 4](http://html1.mh-extra.com/html/microtech/axio-st/axio-st_operation-manual_1789324004.webp)
6
7
Preparation
Battery Indicator Tones
An indicator will sound when the battery voltage is
low . You have approximately 5 minutes* to replace
the battery . An indicator will sound just before the
battery stops working .
* Actual time between low battery indicator and
shut down will vary depending on environmental
noise levels and brand of battery used.
Helpful Hints
• NEVER FORCE THE BATTERY DOOR SHUT;
this could result in serious damage; if the door will
not close securely, check that the battery is
inserted correctly .
• Do not open the battery door too far or damage is
likely to occur .
• Because of their size, it’s a good idea to change
and replace batteries above a table or desk to
reduce the risk of dropping the instrument or
battery .
• Dispose of used batteries immediately in the
proper waste or recycling container .
• Because batteries can vary in size and
performance, your hearing care professional is your
best source for lifespan estimates and verification
that you are using the proper size and type .
Preparation
Insertion and Removal
It is very important that you work closely with your
hearing professional to develop an insertion
technique that is specific for the shape and
contours of your ear . Improper insertion will
result in unsatisfactory performance and comfort .
To insert the hearing instrument:
1) Determine Left or Right by locating the side
marker on the hearing instrument .
2) Hold the instrument in the same side hand with
the dot marker on top .
3) Lift the device to the ear and place at the opening
of the ear canal .
4) Push the device into place in the ear, using the
end of the removal cord as indication that the
device is inserted all the way .