Trigger ON/OFF and Turning(Trigger SW & Trigger Settting)
Status: Trigger OFF
Press On then Trigger ON.
When the trigger is turning off, the button for
the tuning is invalid.
Status: Trigger ON
Press Off then Trigger OFF.
When the trigger is turning on, the button for
the tuning is valid.
Press Auto Tuning then start tuning
automatically.
Press Manual Tuning then the menu of
manual tuning is displayed.
Manual Tuning
Adjust the value of resistance (Resistance)
and value of capacitance(capacitance) then
press Apply .
Trigger level(Level)
When the display is
“
0
”
that the trigger signal is
not transmit. Please tuning again after the
installation situation of the trigger antenna are
confirmed
The output level of trigger signal changes by the
situation of installation of the trigger antenna. Please
test reading that uses J-chip tag in the place used
and confirm the trigger area after the tuning.
10