migra Serial
Large Format, Graphics Compatible Display
Page 46
microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach
+49 9681 91960-0,
+49 9681 91960-10, [email protected], www.microsyst.de
Receiving timeout:
= earliest possible point in time at which the display transmits a
response after receiving a frame.
Between the individual frame bytes may not pass any more than the ori-
ented time (receiving timeout).
The next frame may be sent first after the current frame was worked off
completely.
Therefore you must either keep a sufficient break (depending on the
type of frame) or wait for the response frame.
* Receiving timeout = 3...30 ms
>= 3 x “byte time” (1 “byte time” = transmission time for a single
byte)
makes a faster frame sequence possible
However, does not function with RS 485 and Windows PC
software (because timing for RTS direction changes is inaccu-
rate due to Windows limitations).