MicroStrain WSDA-ETH, Quick Start Manual

Page: 2 / 6

5. Turn the WSDA
®
power switch on (up position).
6. The WSDA
®
will commence its 3 stage boot-up process as described in Figure 1 and
Table 1 below. This will take between 2 and 3 minutes.
Stage Web LED WSDA LED Power LED
1. Initial Power On Red Red Green
2. Booting Up Red Blinking Blue Green
3. Fully Booted Green Green Green
Table 1. WSDA LED Key
Login to the WSDA
®
1. Launch the Live Connect software which is found in:
start > All Programs >MicroStrain > Live Connect
2. The Live Connect window will appear, automatically scan for WSDA
®
, and in a moment
display your WSDA
®
IP address and serial number as shown in Figure 2.
2
Figure 2. Live Connect Interface
Figure 1. WSDA Face Plate