mf400man.doc
5
11.
Dsl
Door
strike
contact (Light
green)
12.
Ds2
Door
strike
contact (Brown)
13.
Busy
Busy to other door stations
(White)
3.3. Power
Supply
Connections
1.
+15vdc
Connect to door stations and handsets
2.
Gnd
Connect to door stations and handsets
3.
Earth
Mains
4.
Neutral
Mains (220vac)
5.
Live
Mains (220vac)
4. Programming
4.1. Handset
Programming
To program a number, remove the required pins on IC3. Pin 1 to Pin 10 and the common ground
as shown below.
IC 3
Pin
1
=
1 (decimal)
Example
2
=
2.
Handset number 50.
3
=
4.
Pin
6
=
32
4
=
8.
5
=
16
5
=
16
2
=
2
6
=
32
-----
7
=
64
50
8
=
128
9
=
256
10
=
512
Two handsets can be programmed to work on the same number for one area.
4.2. Door station Programming
Step 1.
Press 1 and 4 and switch the power on . The “busy” led will flash and the door
access code will be displayed.(Default = 9123). Enter the new door access code ending
with enter “*”. Only three digits must be entered as the first digit will always be “9”.
Step 2
. The first number of the second zone will then be displayed. (Default = 250).
Enter the new number for zone two ending with enter “*”. If you want the first zone to
end with number 50 enter 51 for the beginning of zone two.
Step 3
. The first number to the third zone will then be displayed. (Default = 251). Enter
the new number for zone three ending with enter “*”. If you want the second zone to end
with number 150 enter 151 for the beginning of zone three.
18 17 16 15 14 13 12 11 10
1 2 3 4 5 6 7 8 9
1 2 4 8 16 32 64 128 256
512
PIN –
Decimal
