12
①
Set basic setting
Close and store Basic Settings Menu: Press button P1 and
H1 at the same time, enter the "MENU", then press button P1 or
H1 to choose "EXIT" ,then choose "+" or "-" to set "YES", 2
seconds later, controller returns back to normal display mode.
If user do not store the setting parameter, choose "NO" and
exit.
②
Basic Settings
Settings
Display
Setting
range
Default
If time delay (Ton1) of relay 1
is started, it must wait the
setting time before relay 1
acts when pressure gets to or
overpasses the corresponding
switch point.
0s~99s
0.0
If time delay (Toff1) of relay 1
is closed, it must wait the
setting time before relay 1
switches when pressure gets
to
or
overpasses
the
corresponding return back
0s~99s
0.0
