Gigabit Ethernet Switch – Quick Installation Guide
Page 4 of 9
_______________________________________________________________________________________________
©2017_MICROSENS GmbH & Co. KG_Küferstr. 16_59067 Hamm/Germany_www.microsens.com
2.
Installing the Switch
2.1
Package Contents
The switch
DC adapter
Four adhesive rubber feet
Installation guide
Mounting kit
Note: The switch is an indoor device. If it is to be used with outdoor devices such as
outdoor IP cameras or outdoor WiFi APs, then users are strongly suggested to
install a surge protector or surge suppressor in order to protect the switch.
2.2
Mounting the in a 19-inch Rack
Step 1:
Attach the mounting brackets to both sides of the chassis. Insert screws and
tighten then with a screwdriver to secure the brackets.
Figure 3:
Attaching Brackets to the Switch
Step 2:
Place the switch on a rack shelf in the rack. Push it in until the oval holes in the
brackets align with the mounting holes in the rack posts.
Step 3:
Attach the brackets to the posts. Insert screws and tighten them.
Figure 4: Attaching Brackets to the Rack Post
