background image

VSC8574 Evaluation Board

VPPD-03067 VSC8574 User Guide Revision 2.0

10

Microsemi Headquarters
One Enterprise, Aliso Viejo,
CA 92656 USA
Within the USA: +1 (800) 713-4113
Outside the USA: +1 (949) 380-6100
Sales: +1 (949) 380-6136
Fax: +1 (949) 215-4996
Email: [email protected]
www.microsemi.com

© 2014 Microsemi. All rights reserved. Microsemi and the Microsemi logo 
are trademarks of Microsemi Corporation. All other trademarks and service 
marks are the property of their respective owners.

Microsemi makes no warranty, representation, or guarantee regarding the information contained herein or the suitability of its products and services 
for  any  particular  purpose,  nor  does  Microsemi  assume  any  liability  whatsoever  arising  out  of  the  application  or  use  of  any  product  or  circuit.  The 
products sold hereunder and any other products sold by Microsemi have been subject to limited testing and should not be used in conjunction with 
mission-critical equipment or applications. Any performance specifications are believed to be reliable but are not verified, and Buyer must conduct and 
complete all performance and other testing of the products, alone and together with, or installed in, any end-products. Buyer shall not rely on any data 
and  performance  specifications  or  parameters  provided  by  Microsemi.  It  is  the  Buyer's  responsibility  to  independently  determine  suitability  of  any 
products and to test and verify the same. The information provided by Microsemi hereunder is provided "as is, where is" and with all faults, and the 
entire risk associated with such information is entirely with the Buyer. Microsemi does not grant, explicitly or implicitly, to any party any patent rights, 
licenses, or any other IP rights, whether with regard to such information itself or anything described by such information. Information provided in this 
document is proprietary to Microsemi, and Microsemi reserves the right to make any changes to the information in this document or to any products 
and services at any time without notice.

Microsemi, a wholly owned subsidiary of Microchip Technology Inc. (Nasdaq: MCHP), offers a comprehensive portfolio of semiconductor and system 
solutions for aerospace & defense, communications, data center and industrial markets. Products include high-performance and radiation-hardened 
analog  mixed-signal  integrated  circuits,  FPGAs,  SoCs  and  ASICs;  power  management  products;  timing  and  synchronization  devices  and  precise  time 
solutions, setting the world's standard for time; voice processing devices; RF solutions; discrete components; enterprise storage and communication 
solutions; security technologies and scalable anti-tamper products; Ethernet solutions; Power-over-Ethernet ICs and midspans; as well as custom design 
capabilities and services. Microsemi is headquartered in Aliso Viejo, California, and has approximately 4,800 employees globally. Learn more at www.
microsemi.com.

VPPD-03067

Summary of Contents for VSC8574













Reviews: