PD-IM-7508 Evaluation Board - User Guide
Copyright © 2013
Microsemi
8
Rev 0.1 / 04 Aug 2013
Analog Mixed Signal Group
1 Enterprise, Aliso Viejo, CA 92656, USA; Phone (USA): (800) 713-4113, (ROW): (949) 221-7100 Fax: (949) 756-0308
3 Physical Description
3.1 Switches
Evaluation system comprises switches used to select the desired configuration states of the board.
3.1.1 Reset Button
The dedicated Reset push button SW1 (see Figure 3) resets PoE controller PD39100.
Figure 3: Reset Push Button (SW1)
3.1.2 Power Good Dip Switch
The dedicated Power Good dip switch SW2 (see Figure 4) sets the Power Good pins of the PD69108. This will
allow the user to select one of the available 16 Power Banks.
Note
: if the EVB is powered up by a PD port, the Power Bank is automatically set to Bank #2.
Figure 4: Reset Push Button (SW1)
3.2 Connectors
The following sections provide a general and detailed description of the board connectors.
3.2.1 Connectors Table
The Evaluation system's connectors are listed in Table 1.
Table 1: Connector List
Number Connector
Name
Description
1
U14
RJ45 Connector
8 'RJ45' ports connecting EVB to Powered Device
load
2
U11
Vin Connector
DC in (V
main
) connection used to power EVB
3
CON1
PD Connector
RJ45 for connecting a PSE port to deliver power to
EVB (EVB behaves as a PD).
