![Microsemi AcuEdge Development Kit for Amazon AVS ZLK38AVS2 Quick Start Card Download Page 2](http://html.mh-extra.com/html/microsemi/acuedge-development-kit-for-amazon-avs-zlk38avs2/acuedge-development-kit-for-amazon-avs-zlk38avs2_quick-start-card_1788412002.webp)
2
3
Overview
Microsemi AcuEdge™ Development Kit for Amazon AVS is engineered to help you evaluate voice-
enabled front-end audio systems for your Alexa-enabled products. This kit features Microsemi’s ZL38063
voice processor powered by Microsemi’s proprietary AcuEdge™ technology for front-end audio clean-up
and Sensory’s TrulyHandsFree™ “Alexa” wake-word engine. Options for one, two, or three microphone
configurations allow testing for a variety of applications and environments.
Hardware Assembly Instructions
1. Mount Raspberry Pi 3 to the top ring with four nylon screws, two nylon standoffs, and two nylon nuts.
The circuit board should align with the 40-pin expansion header toward the front of the ring. The nuts
go to either side of the expansion header and the standoffs go opposite to provide stability.
2. Using the outermost holes, mount base using four rubber feet, four metal screws, and four short
metal standoffs.
3. Place center ring (marked JBL Clip 2) on the male threaded ends of the short metal standoffs. Mount
the four long metal standoffs.
4. Place the JBL Clip2 Speaker facing down in the center ring. The speaker will fit snugly in this
position.
5. Using remaining four metal screws, mount the top ring to the long metal standoffs.
6. Mount the ZLE38000-004 Rev 401 circuit board on to the Raspberry Pi board’s 40-pin expansion
header, using the remaining two nylon screws to secure.
7. Plug the speaker cord into the 3.5 mm audio jack of the ZLE38000-004.
8. Follow the below instructions to load the software image onto the SD card. When complete, insert
SD card into Raspberry Pi and power the Raspberry Pi from the included 5 V, 2 A supply.
Software Installation
A pre-configured SD card image can be downloaded from the ZLK38AVS GitHub project page:
https://github.com/Microsemi/ZLK38AVS#important-considerations
Microsemi AcuEdge™ Development Kit for Amazon AVS ZLK38AVS2
Quickstart Card
Additional Documentation
Located in the “/ZLK38AVS/docs” directory on the Raspberry Pi 3 after installation is completed:
• Microsemi_ZLK38AVS_Quickstart.pdf: This Quickstart card
• Microsemi_ZLK38AVS_ProductBrief.pdf: Kit product brief
• Microsemi_ZL38063_ProductBrief.pdf: Microphone Array ASR-assist Audio Processor description
Support
To learn more about Microsemi and its development kit, visit:
https://www.microsemi.com/products/audio-processing/audio-processing-partners
To learn more about Amazon Alexa Voice Service and access the Amazon AVS API reference guide, visit:
https://developer.amazon.com/alexa-voice-service/
Microsemi sales offices, including representatives and distributors, are located worldwide.
To find your local representative, go to
http://www.microsemi.com/salescontacts
.
Microsemi AcuEdge™ Development Kit for Amazon AVS ZLK38AVS2
Quickstart Card