Table of Default Jumper Settings and Current measurement
Jumper Default
Position
Comment
JP2
(1, 2)
Power for V
CC
, current measurement ok
JP3
(1, 2)
3.3V Power for V
CCI
, current measurement ok
JP4
(2, 3)
Flash*Freeze from SW3; position (1, 2) is for
internal Flash*Freeze (mode 2)
JP5
Empty
External power source can be applied here
JP9 (2,
3)
V
CC
is 1.2V except in programming; position (1,
2) fixes V
CC
JP10
(1, 2)
Applies power to V
CCPLF
JP11
(1, 2)
Vertical orientation for battery and USB power
Do not connect a DMM across pins (1, 2) of JP11 for current
measurement as the USB Change over circuit is sensitive to inductance.
Better to connect an external 5V supply to JP5 and then put a DMM in
current mode across (2, 3) for measuring board power.
Table for User Peripherals
Peripheral Comment
AGL125 I/O Name
Pin on
QN132
Pin on
VQ100
D1 LED IO96RSB1 A17
33
D2 LED IO95RSB1 B16
34
D3 LED IO94RSB1 A18
35
SW1 Reset
Switch
GAA2/IO67RSB1
C1
2
Clock 20MHz GFB0/IO123RSB1
A7
11
Flash*Freeze SW3 and JP4
FF/GEB2/IO105RSB1 B12
27
For other peripherals and details on the interface card, see the User Guide
