Microscan MS-810, User Manual

Page: 100 / 144

A-2
MS-810 Industrial Scanner User’s Manual
A
p
p
e
ndice
s
Appendix A — Scanner Specifications
Mechanical Parameters
Length : 3.47” (8.81 cm)Width: 2.59” (6.58 cm)
Height : 1.38” (3.50 cm)Weight: 7.5 oz. (212 g)
Figure A-1 MS-810 Dimensions
2.40"
1,10"
(2.79 cm)
.54"
(1.37 cm)
.53"
(1.35 cm)
M4 x 0.7 x 4.57 mm deep
Mounting holes
(2 places)
Top
(6.10 cm)
1.38"
(3.50 cm)
3.47"
(8.81 cm)
Front
.54"
(1.37cm)
2.50"
(6.35 cm)
.62"
(1.57 cm)
1.40"
(3.56 cm)
2.59"
(6.58 cm)
Bottom
M4 x 0.7 x 3.8 mm deep
Mounting holes
(2 places)
1.10"
(2.7 cm)
2.59"
(6.58 cm)
Side
.93"
(2.36 cm)
Back
Light Source
Type : Laser Diode
Output
Wavelength : 670 nm nominal
Safety Class : CDRH Class II
Operating Life : 50,000 hours @25°C
(10,000 hours @50°C)
Laser Cooling : Thermostatically-controlled thermo-
cooler
Scanning Parameters
Primary Mirror Type : Rotating, 10-faceted
Scan Rate : 300 to 800 scans per second;
default is 400.
Scan Width Angle : Typically 60°
Pitch : ±50° maximum
Skew : ±40° maximum
Label Contrast : 25% min. absolute dark to light
differential at 670 nm wavelength
Optional Raster Mirror Image : 10 raster scan lines
over a 2-degree arc
Communications
Interface : RS-232 standard; also available:
RS-422/485, *DeviceNet, *SDS, *Profibus DP,
*Ethernet
Baud Rates : 300, 600, 1200, 2400, 4800, 9600,
19.2K, 38.4K, 76.8K
Parity : Odd, Even, None
Stop Bits : 1, 2 Data Bits : 7, 8
Protocols
Point-to-Point, Point-to-Point w/RTS/CTS, Point-to-
Point w/XON/XOFF, Point-to-Point w/RTS/CTS &
XON/XOFF, Polling Mode D, Multidrop, User Defined,
User Defined Multidrop.
Scan Range Raster Height
2 inches (50.8 mm) 0.10 inch (2.54 mm)
4 inches (101.6 mm) 0.17 inch (4.32 mm)
6 inches (152.4 mm) 0.24 inch (6.1 mm)
8 inches (203.2 mm) 0.31 inch (7.87 mm)
10 inches (254 mm) 0.38 inch (9.65 mm)