Microscan MS-710, User Manual

Page: 14 / 186

1-2
MS-710 Scanner User’s Manual
1–Qui
ck S
tart
Step 1 — Hardware Required
(Refer to
figure 1-1
.)
Caution: If using your own power supply, be certain that it is wired correctly and sup-
plies voltage is 5 VDC is within the +10 to 28 VDC limits. Incorrect wiring or voltage can
cause software or equipment failures.
Item Part Number Description
1 FIS-0710-XXXX MS- scanner
2 A host computer
a
a. With either a terminal communications program or Microscan’s ESP™ which runs under Windows™
operating system, Windows-95 or higher, including Windows NT™ and Windows XT.
3 61-300026-01
Cable, Communication, DB-25 Plug to DB-9 Socket,
6 foot.
b
b. If using another host cable, make certain it does not have RTS/CTS connected to the host.
4 IB-105 interface Box
5
97-100002-01 (120V)
97-100002-02 (240V)
Power supply
6
99-4400021-03 Optional object detector
1
3
2
6
5
4
Figure 1-1 MS-710 Hardware Configuration