MS-3 CCD Reader Quick Start Guide
3
Step 2 — Connect the System
Caution
: Be certain all cables are connected BEFORE applying
power. Always power down BEFORE disconnecting cables.
To connect the system, do the following:
1. Connect the reader (
1
) to
the “SCANNER” connector
on the IC-331 interface
converter (
2
) using the
attached 3-foot cable.
1
2. Connect the IC-331
directly to the “SCANNER”
15 pin connector on the
IB-131 (
3
).
3. Connect the Host Com-
puter (
4
) to the IB-131
“HOST” 25-pin connector
via the Null Modem Con-
figuration Cable (
5
).
2
4. Connect Power Supply
(
6
) to the IB-131
“POWER” connector.
5. Apply power to the system.
1. Since power supply is included in the single cabling assembly, the reader cable
should not exceed 3 feet. RS-232 cabling from the IB-131 to the host can be up
to 47 feet provided it does not include power input
2. If using your own null modem RS-232 host cable, be certain that the host’s TxD
connects to the reader’s RxD and the reader’s TxD connects to the host’s RxD.
Hardware Connections
4
1
2
3
7
5
Scanner
Ne
tw
or
k
Ho
st
6
