Rev 2.0.0, Jan 2009
HE45T Quickstart Guide
25
Handle Trigger
FIGURE 1–42.
Handle Trigger Programming Codes
Turbo Dot Peen Mode
The HE45T with the default settings offers the best overall
performance for Data Matrix DPM reading. For reading dot peen
marks with cell size larger than 15 mils or 0.015 inches, it is often
possible to improve the reading performance by enabling the Turbo
Dot Peen mode. It is also recommended that you use Read With
Near Field Only mode with the Turbo Dot Peen On mode to
achieve the best reading response.
Note: Turbo Dot Peen mode should not be used for reading small
marks (dot peen or others) as it may increase the processing time
and reduce the robustness of reading small marks.
FIGURE 1–43.
Turbo Dot Peen Mode Codes
Read With Both Imagers (Default)
Read With Far-Field Imager
Read With Near-Field Imager
On
Off
Save Settings
Summary of Contents for HE45T
Page 1: ...HE45T Quickstart Guide EM 20953 1V200 Rev 2 0 0 Jan 2009...
Page 4: ......
